Code Generation ▹ Insert Code lets you insert the code that is generated according to the current settings of the Calibration Assistant into the program window. This is also accessible as tool bar button or as button inside the tab Code Generation. Inserting code via menu or tool bar will generate code for calibration and samples.
With Code Generation ▹ Release Generated Code Lines you can release the generated and inserted code lines. After releasing the code lines, all connections between the Calibration Assistant and the Program Window of HDevelop are lost. Changes, for example, the deletion of code lines, can then only be applied directly in the Program Window and not from within the Calibration Assistant anymore.
Via the menu item Code Generation ▹ Delete Generated Code Lines you can delete the code lines that you have previously generated and inserted into the Program Window of HDevelop from within the Calibration Assistant. Note that this works only as long as you have not yet released the code lines.
Via the menu item Code Generation ▹ Show Code Preview you can open the dialog for the Code Preview in the tab Code Generation.