下载中心

康耐视Cognex IN-SIGHT WAFER ID 4.5.0 CR3 FOR 1720/1740 SERIES READERS

IN-SIGHT WAFER ID 4.5.0 CR3 FOR 1720/1740 SERIES READERS
Release 4.5.0 CR3 is a patch release of firmware/software for all In-Sight® 1720 series and In-Sight 1740 series wafer readers. This release contains changes and fixes to known issues in firmware/software version 4.5.0. - Added a 'Chars, Canon' mark type to the General tab to allow for reading Canon font OCR marks. - When a read is executed, the wafer reader now properly attempts to read the mark for all enabled Configs until the Timeout limit is reached. Previously, all enabled Configs were tried, but the Timeout value was ignored. - If Tune is selected from the Retry drop-down for more than one enabled Config, then a read is executed and retry tuning automatically occurs, the Read Log's overall read time (in seconds) now displays the correct time it took to perform the read.
文件类型: exe
文件大小: 28.2MB
版本: 4.5.0 CR3
发布日期: 2012/2/16

文件名: In-Sight Wafer ID 4.5.0 CR3.exe
文件大小: 29587176 字节 (28.22 MB)
修改日期: 2021-02-14 23:03
版本: 4.5.174.0
MD5: bc976870e01ea282c30beb4496c8ef06
SHA1: 6a042ed8a509f4bfa77120a7af89e92f145b8cb1
SHA256: 72b78920945777d625029c53574a2951d1318bbe8c807f2ba54446855dbd87ae
CRC32: 7bf297b4

康耐视官方下载和百度网盘下载：

康耐视Cognex IN-SIGHT WAFER ID 4.5.0 CR3 FOR 1720/1740 SERIES READERS

http://visionbbs.com/thread-32505-1-1.html

(出处: 石鑫华视觉论坛)