下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2013.09 LabVIEW2013 Win32/64Eng 视觉采集软件VASSeptember2013
VAS2013.09 相较于VAS2013.08增加了一些新硬件的支持。其它差别不大，如果不是刚好遇到这类硬件，两个版本都可以适用于LabVIEW2013。如果担心遇到问题，那就装VAS2013.09，升级的理论上会更好一些。

百度云盘下载和NI官方下载地址：
请购买附件下载查看

NI Vision Acquisition Software 2013.09 LabVIEW2013 Win32/64Eng 视觉采集软件VASSeptember2013

http://pcmv.cn/thread-1986-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Acquisition Software Release Notes

New Features

NI-IMAQdx 4.3

• Support for the NI CVS-1457RT

• Support for USB3 Vision cameras on VxWorks CompactRIO and Single-BoardRIO Real-Time targets
  

NI-IMAQ I/O 2.8

• Support for the NI CVS-1457RT

• NI-IMAQ I/O can be added as an additional installer in LabVIEW Application Builder
  

Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras

Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdx

Maintenance and Support Policy

Minimum System Requirements

Updates and Improvements

Software Support

Operating Systems

• LabVIEW Real-Time Module 2010 or later

• Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.
  

Remote Target Support

Development Environments

• LabVIEW 2010 or later

• LabWindows/CVI 8.1 or later

• Microsoft Visual C/C++ 6.0 or later

• Microsoft Visual Basic 6.0 or later

• Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)
  

Additional Software

• NI Vision Development Module 7.1 or later

• NI Vision Builder for Automated Inspection (Vision Builder AI) 2.5 or later
  

Installation Instructions

• Insert the NI Vision Acquisition Software installation media.

• If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.

• Follow the onscreen instructions.
  

Installing from an NI Software Suite or NI Product Bundle

Automating the Installation of NI Products

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Configuring NI-IMAQ

• Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

• Run MAX.
  

• Double-click the MAX icon on the desktop. You can use MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

• Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
  

• Select a camera file, and acquire an image.
  
  

• Use the Snap button to acquire and display a single image with the image acquisition device.

• Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
  

• Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

• Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

• To change the camera settings, modify the parameters at the bottom of the image viewer panel.

• You can acquire an image in the following ways:
  
  

Configuring a Remote PXI/Compact PCIe Image Acquisition Device

• Launch MAX.

• In the Configuration tree, expand Remote Systems.

• Expand the appropriate system.

• Expand Devices and Interfaces.

• Expand NI-IMAQ Devices.

• Expand the device you want to configure.
  

Configuring NI-IMAQdx

Installing IEEE 1394 Hardware

Installing the High Performance GigE Vision Driver

• Install your NIC.
  

• If Windows does not prompt you to choose a driver, proceed to step 2.

• If Windows prompts you to choose a driver, proceed to step 3.
  

• Right-click the NIC in the Device Manager, and select Update Driver.

• Choose not to connect to the Windows Update Web site, and click Next.

• Choose to Install from a list or a specific location, and click Next.

• Choose Don't Search. I will choose the driver to install.

• Click Next.

• Select National Instruments GigE Vision driver from the list, and click Next.

• Click Finish.

  Note: Windows may return a warning stating that the driver is unsigned. It is safe to ignore the warning.

  
  

Installing the Universal GigE Vision Driver

• Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.

• Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
  

  Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.

• Right-click the NIC in the Device Manager, and select Properties.

• Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.

• Select the largest frame size available and click OK.
  

• Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
  

Configuring Multiple Ports

• Open the Network Connections window in Windows, and select all of the ports that cameras will be connected to by holding <Ctrl> while clicking each port.

• Right-click one of the selected ports, and choose Bridge Connections.

  Note: If you are not using the High Performance Driver, you will be unable to use jumbo frames on bridged devices.

  
  

Configuring NI-IMAQdx for Windows

• Connect the camera.

• Run MAX.
  
  

• Double-click the MAX icon on your desktop. You can use MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• For IEEE 1394 cameras, NI-IMAQdx may not be associated with the camera. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.

• Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
  

Configuring NI-IMAQdx for the LabVIEW Real-Time Module

• Install NI-IMAQdx software on your Windows development machine.

• Ensure that your RT target is connected to the same subnet as the Windows development machine.

• Run MAX.
  

• Double-click the MAX icon on your desktop.

• Expand the Remote Systems list in the configuration tree.

• Select your RT target in the list.

• Configure your network settings. Refer to the Remote Systems Help in MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
  

• Install NI-IMAQdx on the RT target.
  

• Click the Software item below the RT target in the configuration tree.

• Click Install Software on the MAX toolbar to launch the LabVIEW Real-Time Install Software Wizard.

• Select NI-IMAQdx RT, as well as any additional software you would like to install on the target machine.

• Click Next. Review the list of software you selected to install.

• Click Next to begin downloading the software to the target machine. When MAX has finished downloading the software, it restarts the remote device.

• Click Finish.
  

• Connect your camera to your remote system.

• Press <F5> to refresh the MAX configuration tree. Your camera should be listed in the Remote Systems list.

  Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
  

Configuring USB3 Vision hardware on Windows XP

• Connect the camera.

• Locate the camera in Device Manager.

• Right-click the camera and select Update Driver.

• Choose not to connect to the Windows Update Web site, and click Next.

• Choose to Install from a list or a specific location, and click Next.

• Choose Don't Search. I will choose the driver to install.

• Click Have Disk....

• Click Browse and navigate to Program FilesNational InstrumentsNI-IMAQdxStagingNI USB3 Vision.

• Click OK. In the next window, select your device, then click Next.

• A warning will appear. Click Continue Anyway.

• Click Finish.
  

Known IssuesNI-IMAQ

• In LabVIEW 2012 and earlier, error codes returned during a property node read or write are not being reported correctly. The status flag is set correctly, to notify you that an error occurred, but the code is set to an invalid value.
  

NI-IMAQdx

• Volume License Manager will attempt to check out available Vision Development Module licenses before trying Vision Acquisition Software licenses.

• Attempts to extend the evaluation period for Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Run-Time Engine are unsuccessful in connecting to the internet.

• Unplugging a USB3 Vision camera on NI Linux or VxWorks Real-Time targets can cause a crash.

• Bayer VNG decoding can overflow when decoding 16-bit Bayer pixel formats.

• The Bayer bilinear algorithm does not properly decode pixels on the right side of the image for certain image widths.
  

NI-IMAQ I/O

• On NI CVS-1457RT targets, serial configuration is not available in MAX. Programmatic configuration is still available in Vision Builder AI and LabVIEW.

• In LabVIEW 2013, Project Explorer displays the NI 1454, 1455, and 1456 Compact Vision Systems. However, LabVIEW 2013 does not support the NI 1454, 1455, and 1456 Compact Vision Systems.
  

Documentation

NI LabVIEW Documentation

.NET Documentation

• NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:

  If you have Measurement Studio installed:

  
  

  If you do not have Measurement Studio installed:

  
  

• From Visual Studio, select Help»Contents to view the Visual Studio table of contents. The NI Measurement Studio Help is listed in the table of contents.
  

• From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <Measurement Studio> is the location to which Measurement Studio is installed. The help launches in a stand-alone help viewer.

• From Visual Studio, select Measurement Studio»NI Measurement Studio Help.
  

How to Use NI Software with Microsoft Windows 8

Using NI Launcher

Pinning Frequently Used Applications

Finding All Programs

NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

Copyright

End-User License Agreements and Third-Party Legal Notices

• Notices are located in the <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

Trademarks

Patents