NI Vision Acquisition Software 2013.02 LabVIEW2012SP1 Win32/64Eng 视觉采集软件VASFebruary2013-下载中心-LabVIEW视觉-机器视觉-图像处理-工业相机-工业镜头-机器视觉光源-电源控制器-Vision-Halcon-石鑫华视觉-石鑫华视觉

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2013.02 LabVIEW2012SP1 Win32/64Eng 视觉采集软件VASFebruary2013

百度云盘下载：
EXE版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
ZIP版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

exe

文件大小: 1717750848 字节 (1.60 GB)

修改日期: 2013-04-13 12:41

MD5: 3362e867af9369ea7528966280ae126a（官方正确）

SHA1: 93c4596b83f43b5c81d4314e9d6ce549e598ea54

SHA256: a8bf49db1d8aa33351d9de19191b2694f352f973e3f3e3e5bb22e9168c657eb1

CRC32: aa449477

zip

文件大小: 1721995505 字节 (1.60 GB)

修改日期: 2020-02-14 22:21

MD5: bad7841d701882c56dff05755e5ec658（官方正确）

SHA1: d35cc1bff1121254a71d01baac3c6c35cc7e1ffc

SHA256: ec272260ef34e8b1cf0d02acbd1a5392c6bfb996de5a7bdad812501016b1043b

CRC32: 8a384c45

NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看

NI Vision Acquisition Software 2013.02 LabVIEW2012SP1 Win32/64Eng 视觉采集软件VASFebruary2013

http://pcmv.cn/thread-612-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Acquisition Software Release Notes

February 2013

This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections:

New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
Minimum System Requirements
Updates and Improvements
Software Support
Installation
Automating the Installation of NI Products
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation

NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.

New Features

This release of Vision Acquisition Software includes the following new features:

NI-IMAQ 4.7.2

NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices.

Support for NI 1712, 1732, 1752, and 1754 Smart Cameras
Support for LabVIEW 2012 SP1
In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition
The ability to decode Bayer-encoded images in Measurement & Automation Explorer (MAX)
The IMAQ Bayer Color Decode VI and IMAQ Create Bayer LUT VI have been removed from the NI-IMAQ palette. Existing implementations will be unaffected by this change. For new LabVIEW applications, use the new IMAQ Bayer to RGB VI, which is installed with the Vision Development Module, for decoding Bayer-encoded images.

NI-IMAQdx 4.1

NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, and IP cameras.

Support for the NI PCIe-8237R GigE Vision interface device
Support for the NI PCIe-8236 GigE Vision interface device
Support for LabVIEW 2012 SP1
In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition

NI-IMAQ I/O 2.6.1

NI-IMAQ I/O provides support for reconfigurable input/output (RIO) using National Instruments EVS-1460 Series Embedded Vision Systems, CVS-1450 Series compact vision systems, and other GigE Vision and IEEE 1394 reconfigurable image acquisition devices.

Support for Vision-RIO queued pulse operations on the NI PCIe-8237R
Support for LabVIEW 2012 SP1
In the LabVIEW Example Finder, all examples are now categorized under Hardware Input and Output»Vision Acquisition
For LabVIEW 2011 and later, new Vision-RIO examples have replaced NI-IMAQ I/O examples

Vision Acquisition Software Express VI

The ability to log acquired images to file
The ability to decode Bayer-encoded images
Vision Development Module is no longer required to perform simulated acquisitions

Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras

NI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls the Legacy NI-IMAQ for IEEE 1394 Cameras feature of NI-IMAQdx 3.3 or earlier. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/infoand enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx does not affect separate installations of Legacy NI-IMAQ for IEEE 1394 Cameras.

Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdx

In most cases, there is a one-to-one correlation between an NI-IMAQdx VI or function and Legacy NI-IMAQ for IEEE 1394 Cameras VI or function. For example, the IMAQ 1394 Snap VI has been replaced with the IMAQdx Snap VI and takes similar parameters.

You set and get camera attributes differently for each driver. For example, with Legacy NI-IMAQ for IEEE 1394 Cameras, you passed in an enumerated type that contained the attribute name and a value. With NI-IMAQdx, you pass a string with the attribute name and value.

Another major difference between the two drivers is that NI-IMAQdx now supports the Event Structure in LabVIEW. Rather than using occurrences, as you did with Legacy NI-IMAQ for IEEE 1394 Cameras, you can now register the Frame Done event to fire in LabVIEW for more readable code.

Maintenance and Support Policy

National Instruments recommends that all new applications be developed with NI-IMAQdx. All new features, bug fixes, or other enhancements in the future will be made to the NI-IMAQdx driver and API. NI-IMAQ for IEEE 1394 Cameras is "frozen" to ensure that the behavior of existing applications does not change. NI-IMAQdx no longer includes Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you requires Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. National Instruments Applications Engineers no longer support the Legacy NI-IMAQ for IEEE 1394 Cameras API.

Minimum System Requirements

The development computer must meet the following requirements to run NI Vision Acquisition Software:

Processor	Pentium 4 1 GHz or equivalent
Memory	512 MB RAM
Display	1,024 × 768 resolution video adapter with a 16-bit display
Minimum Recommended Free Hard Disk Space	Vision Acquisition Software	2 GB
	NI-IMAQ	1 GB
	NI-IMAQdx	1 GB
	NI-IMAQ I/O	1.5 GB
Operating System	Windows 8/7/Vista/XP SP3 (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit)
Browser	Microsoft Internet Explorer 6.0 or later

Updates and Improvements

The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.

ID	Fixed Issue
380338	The initial state of Vision-RIO input lines reads low, even if the line is high.
379910	In certain scenarios, MAX can crash when interacting with NI Vision devices.
362755	clsernat.dll should be installed and registered for 64-bit systems.

Software Support

This section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software.

Operating Systems

NI-IMAQ and NI-IMAQdx: LabVIEW Real-Time Module 8.6 or later
NI-IMAQ I/O: LabVIEW Real-Time Module 2009 or later
Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2008 R2/Server 2003 R2 (32-bit). Refer to the following table for more information.

Note NI Vision Acquisition Software does not support Windows Server non-R2 editions.

Device	Windows 8/7/Vista/XP SP3/Server 2003 R2 32-bit versions	Windows 8/7/Vista/Server 2008 R2 64-bit versions
NI 1405	Yes	Yes*
NI 1407	Yes	Yes*
NI 1408	No	No
NI 1409	Yes	Yes*
NI 1410	Yes	Yes*
NI 1411	Yes	Yes*
NI 1422	Yes	Yes*
NI 1424	Yes	Yes*
NI 1426	Yes	Yes*
NI 1427	Yes	Yes*†
NI 1428	Yes	Yes*
NI 1429	Yes	Yes*†
NI 1430	Yes	Yes*†
NI 1433	Yes	Yes*†
NI 1435	Yes	Yes*†
NI 1473R	Yes	Yes*†
NI 1483	Yes	Yes*
NI 8231	Yes	Yes
NI 8234	Yes	Yes
NI 8235	Yes	Yes
NI 8236	Yes	Yes
NI 8237R	Yes	Yes
NI 8252	Yes	Yes
NI 8254R	Yes	Yes
NI 8255R	Yes	Yes
* Applications developed using LabVIEW 8.2.1 or later will run on systems with more than 3 GB of physical memory. Applications developed using other development environments, such as Microsoft Visual C, Visual Basic, and .Net, are limited to systems with 3 GB or less of physical memory. All 32-bit applications, including those developed using LabVIEW, may not allocate more than 2 GB of memory total. † A firmware update is available for this device to allow non-LabVIEW applications to run on systems with more than 3 GB of physical memory. To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware.

Remote Target Support

NI Vision Acquisition Software September 2011 was the last version of NI Vision Acquisition Software to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.

Development Environments

NI-IMAQ and NI-IMAQdx: LabVIEW 8.6 or later
NI-IMAQ I/O: LabVIEW 2009 or later
LabWindows/CVI 8.1 or later
Microsoft Visual C/C++ 6.0 or later
Microsoft Visual Basic 6.0 or later
Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)

Additional Software

You can also use NI-IMAQ, and NI-IMAQdx with the following National Instruments software packages to prototype, benchmark, and deploy your applications.

NI Vision Development Module 7.1 or later
NI Vision Builder for Automated Inspection (Vision Builder AI) 2.5 or later

Installation Instructions

Complete the following steps to install NI Vision Acquisition Software:

Note: You must have administrator access to install the NI Vision Acquisition Software.

Insert the NI Vision Acquisition Software installation media.
If you do not have autorun enabled, double-click <Measurement Studio> is the location to which Measurement Studio is installed. The help launches in a stand-alone help viewer.
From Visual Studio, select Measurement Studio»NI Measurement Studio Help.

If you do not have Measurement Studio installed:

From Visual Studio, select Help»Contents to view the Visual Studio table of contents. The NI Measurement Studio Help is listed in the table of contents.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

NI Vision Acquisition Software 2013.02 LabVIEW2012SP1 Win32/64Eng 视觉采集软件VASFebruary2013

LabVIEW视觉

联系我们

在线咨询

免费通话

微信扫一扫