下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Builder for Automated Inspection 2015F1 Win32/64Eng 自动检测视觉生成器VBAI2015F1 LabVIEW2016版适用
不用编程的机器视觉与图像处理应用软件，只需要拖动需要的测试测量函数，完成脚本编写即可，无需深厚的编程功底。
Download Language: English
Product Line: Vision Software
Version: 2015 f1
Release date: 08-01-2016
Software type: Application Software
Operating system: Windows 8 32-bit; Windows 8 64-bit; Windows 7 32-bit; Windows 7 64-bit; Windows Vista 32-bit; Windows Vista 64-bit; Windows XP 32-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit

百度网盘下载：
标准下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI下载器下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
标准下载：
请购买附件下载查看
NI下载器下载：
请购买附件下载查看

NI Vision Builder for Automated Inspection 2015F1 Win32/64Eng 自动检测视觉生成器VBAI2015F1 LabVIEW2016版适用

http://pcmv.cn/thread-14100-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Builder for Automated Inspection 2015 f1 Readme

System Requirements

Installation Instructions

• Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.

• Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.

• Vision Builder AI prompts you to enter your user information. Select one of the following options:
  

  If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.

• Install this product using the following serial number

• Install this product for evaluation
  

• Continue to follow the instructions on the screen.
  

Automating the Installation of NI Products

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Activation Instructions

• Launch Vision Builder AI.

• Click Yes when prompted to activate Vision Builder AI.

• Ensure that Automatically activate through a secure Internet connection is selected, and click Next.

• Enter your serial number, and click Next.

• Enter your registration information, and click Next.

• You can enter an email address to receive a copy of the activation code for your records.
  

New Features

• Industrial Controller Support
  

• Vision Builder AI now supports the IC-3171 and IC-3172 industrial controllers.
  

• Hardware-based Precision Time Protocol (PTP) / IEEE 1588-2008 Support
  

• Hardware-based Precision Time Protocol (PTP), also known as IEEE 1588-2008, is supported on IC-3171, IC-3172 and IC-3173 real-time targets.
  

• Flat Field Correction Step
  

• This step corrects for intensity variations due to lighting and lens non-uniformity.
  

• Color Palette Support
  

• This step allows you to select predefined or user-defined color palettes within inspection steps to display 8- and 16-bit images.
  

• Industrial Controller Support
  

• Vision Builder AI now supports the IC-3120, IC-3121, and IC-3173 industrial controllers.
  

• Software-based Precision Time Protocol (PTP) / IEEE 1588-2008 Support
  

• Software-based Precision Time Protocol (PTP), also known as IEEE 1588-2008, is supported on CVS-1458RT, CVS-1459RT, IC-3120, and IC-3121 targets.
  

• Embedded UI Support
  

• The Inspection Interface can be displayed using the Embedded UI on Linux RT targets. This allows you to use an HMI to load, run, and interact with your inspections.
  

Updates and Improvements

• Network Drive Mounting
  

• Mounting network drives is supported from Linux RT targets for faster and more convenient data logging and image logging than FTP.
  

• Vision Assistant Step Improvements
  

• Support added for setting bit-depth of 16-bit images.

• The Geometry step's Rotation operation provides access to previous measurements for the Angle.

• The Geometry step's Rotation operation allows you to maintain the image size after rotation.

• The Operator and Color Operator steps provide access to previous measurements for the Constant.

• The Image Buffer step provides access to the Variable Manager to create new image variables.
  

• Network Trigger Support
  

• Network triggering is added for GigE Vision cameras that support action commands and are attached to a PCIe-8237R, CVS-1457RT, CVS-1458, CVS-1458RT, IC-3120, or IC-3173.
  

• Ethernet/IP Improvements
  

• Custom tags are now global and can be configured in the Communication Device Manager.

• Support added for SLC-500 and CIP messaging types.

• Support added for arrays of previous measurements.

• Support added for access to previous measurements from other states.
  

• Ethernet/IP Server Improvements
  

• Support added for adding custom descriptions to register settings.

• Support added for customizing available registers.

• Support added for arrays of previous measurements.

• Support added for access to previous measurements from other states.
  

• Simulate Acquisition Step Improvements
  

• Support added for reading extra information embedded in PNG files.

• Support added for setting bit-depth for read files.
  

• Using Contour ROI Measurements from the Measure Intensity Step in the Results Manager
  

• The Measure Intensity step supports saving an array of intensity values from an open contour ROI (e.g. line, broken line, freehand line).
  

• 16-bit Auto-Threshold Support
  

• The Threshold Image, Detect Object, and Count Pixels steps support the use of 16-bit auto-threshold methods.
  

• Calculator Step Improvements
  

• Support added for numeric conversion functions and data manipulation.
  

• Run LabVIEW VI Step Improvements
  

• ROIs can be passed as input into the Run LabVIEW VI step.

• The UI window for the Run LabVIEW VI Step supports resizing.

• Support added for updating inspection variables from the Run LabVIEW VI step.
  

• Overlay Step Improvements
  

• Overlays can be added or removed conditionally.

• The width of overlays can be adjusted in the Custom Overlay step.

• Measurement results from other inspection states can be used for overlays in the current state.
  

Fixed Issues