下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用
NI机器视觉、图像处理软件。不需要学习太多编程知识，即时使用验证。可脱离LabVIEW编程平台，独立完成检测任务。可应用于NI智能相机、嵌入式视觉平台等。石鑫华视觉珍。百度网盘下载与NI官方下载：
NI Vision Builder for Automated Inspection 2011 VBAI2011(2011.8.2)

百度云盘下载：
ZIP版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 购买附件下载查看
ISO版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
购买附件下载查看

NI Vision Builder for Automated Inspection 2011 Win32Eng 自动检测视觉生成器VBAI2011 LabVIEW2011版适用

http://pcmv.cn/thread-729-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Builder for Automated Inspection 2011 Readme

System Requirements

Installation Instructions

• Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.

• Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.

• Vision Builder AI prompts you to enter your user information. Select one of the following options:
  

  If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.

• Install this product using the following serial number

• Install this product for evaluation
  

• Continue to follow the instructions on the screen.
  

Activation Instructions

• Launch Vision Builder AI.

• Click Yes when prompted to activate Vision Builder AI.

• Ensure that Automatically activate through a secure Internet connection is selected, and click Next.

• Enter your serial number, and click Next.

• Enter your registration information, and click Next.

• You can enter an email address to receive a copy of the activation code for your records.
  

Deployment Policy for Vision Builder AI

Licensing Options

• Vision Builder AI Full-Featured (778649-01)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.

• Vision Builder AI Run-Time (779799-03)—Allows you to deploy existing inspections to a host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.

• Vision Builder AI Development Toolkit (779343-03)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
  

New Features

• NI 177x Smart Camera support. Use the Acquire Image (Smart Camera) step to configure an acquisition and acquire images from any NI 177x Smart Camera.

• New Max Caliper step. Use the Max Caliper step to obtain precise maximum distance measurements based on contour extraction.

• Updated calibration features. Vision Builder AI now supports spatial calibrations that model perspective distortion, rectilinear lens distortion, or camera model parameters such as focal length and optical axis position. You can access the NI Calibration Training Interface from the Calibrate Image step or from the Calibration tab on any acquisition step.

• New C API. Use the C API to control Vision Builder AI from C and C++ development enviroments, such as LabWindows/CVI, or .NET development environments, such as Microsoft Visual Studio 2005 or 2008.

• Updated Welcome Screen. The Vision Builder AI Welcome screen has been updated. Use the icons to the right of the target list to manage a selected target:
  
  

• Refresh Target List—Refresh the list of available remote target devices.

• Add Target—Add a new remote target device to the list.

• Add Simulated Target—Add a simulated remote target device to the list of targets. Use a simulated to develop an inspection for deployment when the actual remote target is not available.

• Configure Target—Configure the selected remote target device.
  

Updates

Remote Target Support

• NI 17xx Smart Cameras

• NI 177x Smart Cameras

• NI CVS-1450 Series Compact Vision Systems

• NI EVS-1463RT Embedded Vision Systems

• NI EVS-1464RT Embedded Vision Systems
  

PC-Based Image Acquisition and I/O Support

• National Instruments image acquisition devices

• IEEE 1394 industrial digital cameras

• GigE Vision cameras

• DirectShow-compatible USB cameras

• IP cameras

• digital or analog I/O from NI data acquisition (DAQ) devices

• serial devices
  

National Instruments Image Acquisition Devices

IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP Cameras

• Launch MAX.

• In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.

• Expand NI-IMAQdx Devices to obtain a list of available cameras.

• Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
  

NI Analog and Digital I/O Devices

Serial Communication

Known Issues

General

• Vision Builder AI does not support U16 images.

• Vision Builder AI behaves unexpectedly or may not display an inspection image if the image is large and your computer is low on available memory.

• If you configure a step to generate a status based on pixel values and subsequently calibrate the image, the step will compare calibrated values against pixel-based limits and might fail.

• The Geometric Matching step generates an initialization error if the range specified for Scaled matches is large enough to cause the target to run out of memory.

• When connected to a remote target in the Configuration interface, the TCP Communication Terminal is not updated if you select an Operate»Run Inspection option.

• When connected to a remote target in the Configuration interface, the Serial Communication Terminal is not updated if you select an Operate»Run Inspection option.

• Calculator step performance may decrease if the Display Result Image for this State checkbox is enabled.

• The number of logged images resets if an inspection that contains an Image Logging step is closed and opened.

• When connected to a remote target, the Configuration interface does not execute the Cleanup state.

• After connecting to a remote target and starting an inspection in the Vision Builder AI Configuration interface, if you lose communication and reconnect to the target the inspection opens in the Vision Builder AI Inspection interface.
  

LabVIEW Project Integration

• You can create a new VI in the context of a remote target added in Vision Builder AI Mode. A VI created in this context cannot run or support shared variables. If you try to add a shared variable to the VI, the VI generates an error message indicating that the target does not support shared variables. Always create a VI in the context of My Computer or a remote target added in LabVIEW Real-Time Mode.

• When you add a NI Smart Camera or NI 1460RT Series Embedded Vision System to a LabVIEW project in Vision Builder AI Mode and the target and development computer are located on different subnets, shared variables are not automatically listed for the target. To list shared variables, right-click the target and select Connect.
  

Vision Builder AI Development Toolkit

• When using the Vision Builder AI Development Toolkit, you must close all open LabVIEW VIs before attempting to create a new step or importing a step from a previous version of Vision Builder AI.
  

Windows Firewall

• Microsoft Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003, or Windows XP with Service Pack 2 (SP2) or later installed
  When you launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Depending on your operating system, select Allow access or Unblock this program so that Vision Builder AI can communicate with your remote target.

• Microsoft Windows XP with Service Pack 1 (SP1) installed
  If the Microsoft Windows XP Internet Connection Firewall (ICF) is enabled, Vision Builder AI cannot discover or configure remote targets unless you disable the ICF. Perform the following steps to disable the Internet Connection Firewall:
  
  

• From your desktop, open Network Connections by selecting Start»Control Panel»Network Connections.

• Double-click the connection you want to modify.

• Click Properties.

• On the Advanced tab, clear the Protect my computer and network by limiting or preventing access to this computer from the Internet checkbox.
  

Additional ResourcesHow do I get started?

Where can I find reference information?

• NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.

• NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.

• NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.

• NI Vision Builder for Automated Inspection: ActiveX Component Reference Help—Contains information about the ActiveX objects available to embed Vision Builder AI inspections into ActiveX applications.
  

• Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.

• NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
  

Where can I find examples?

Where else can I go for Vision Builder AI information?