下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI InstrumentStudio 2021 Win64Eng NI仪器套件InstrumentStudio21.0.0

InstrumentStudio
InstrumentStudio是一款免费的应用程序软件，提供了集成的交互式PXI测量方法。
InstrumentStudio可帮助您统一显示数据，将仪器配置导出到代码，并监测和调试您的自动测试系统。 您可以使用大型高分辨率显示器在统一显示界面上查看数据，然后捕获多仪器屏幕截图和测量结果。 您还可保存项目级配置，以便针对特定的待测设备更轻松地重复进行测试，或将仪器配置导出到编程环境，以简化代码并保证测量相关性。您还可以同时使用代码和InstrumentStudio来监测和调试正在运行的测试应用程序。

2021
21.0.0
文件大小: 1608472576 字节 (1.50 GB)
修改日期: 2021-04-22 21:46
MD5: ebd25b08862d2e9c0b4ccdf643af057a
SHA1: e46e5c893684f593c4ca3238868baa8fcbef7708
SHA256: be71c068578faa0ebbc4f2f19fb9b266c97b297b6b829490de0692b98005fc52
CRC32: f9249668

百度网盘与NI官方下载地址：

NI InstrumentStudio 2021 Win64Eng NI仪器套件InstrumentStudio21.0.0

http://pcmv.cn/thread-27211-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

InstrumentStudio 2021 Readme

Overview

System Requirements

• Pentium 4 G1 equivalent or later (Intel i5 equivalent or higher recommended)

• 4 GB RAM

• 10 GB disk space

• 1024 x 768 screen resolution (1366 x 768 or higher recommended)
  

Supported Operating Systems

• Windows 10 64-bit

• Windows Server 2016 64-bit
  

Application Software Support

Installing Instructions

Product Security and Critical Updates

New FeaturesInstrumentStudio 2021

• Added new RFSG Signal Generator panel supporting interactive use and debugging using PXIe-5820, PXIe-5830, PXIe-5831, PXIe-5832, PXIe-5840, and PXIe-5841.

• Added support for the PXIe-4135(35W) and PXIe-4137(35W) source measure unit, newly supported in NI-DCPOWER 20.7.
  

InstrumentStudio 2020

• Added support for the PXIe-4139(40W) source measure unit, newly supported in NI-DCPower 20.5.

• Added support for multichannel session in the SMU/Power Supply panel, newly supported in NI-DCPower 20.6. Initializing an NI-DCPower session with independent channels allows you to use multiple instruments in the same session. With independent channels, you can configure multiple channels of the same instrument, or of multiple instruments independent of one another within the same session.

• Added support for monitoring merged channels in debug mode on the PXIe-4147. Merged channels are newly supported in NI-DCPower 20.6. Merging channels of an NI SMU allows you to use multiple channels in unison to increase the current you can source beyond the normal maximum for a single SMU channel.
  

InstrumentStudio 2019 SP1

• Added support for the PXIe-4147 source measure unit, newly supported in NI-DCPower 20.0.
  

InstrumentStudio 2019

• Added power spectral density measurements to oscilloscope FFT channels.

• Multiple NI-SCOPE devices of the same model can now be synchronized in the same oscilloscope panel.

• Added support for selecting trigger sources and events from other NI devices in your system.

• Added waveform graphing, pulse current, pulse voltage, voltage sequence, and current sequence modes to SMU panels, including automatic hardware synchronization across multiple devices.

• Added asymmetric limits and software-protected ranges to SMU/Power Supply panels.

• Added NI-DCPower SourceAdapt configuration to SMU panels, useful for transient measurements.

• Added channel views to hide idle channels, show power calculations, and condense channel views to the SMU/Power Supply panels.

• Added inductance and capacitance measurements along with open and short cable compensation to digital multimeter (DMM) panels.

• Added the ability to generate waveforms from binary files to the waveform generator panel.

• Added debugging and monitoring support to the waveform generator panel.

• Added exporting configuration files from the waveform generator panel for use with the NI-FGEN driver.

• Added capability to export device configurations to TestStand for use in test step configuration.

• Added ability to use pin maps created in Digital Pattern Editor to group devices and channels by site and use pin names for channel aliases.
  

InstrumentStudio 2018 SP2

• Added support for the PXIe-5163 oscilloscope, newly supported in NI-SCOPE 18.7.

• Added CSV file format for data capture.

• Added support for exporting instrument events to PXI chassis trigger lines.

• Added support for arbitrary waveform generation mode to the Waveform Generator panels.

• Added support for frequency list and sweep modes to the Waveform Generator panels.

• Added FFT channels, frequency markers, and FFT channel measurements to the Oscilloscope panels.

• Added additional 2-channel measurements to the Oscilloscope panels.
  

InstrumentStudio 2018 SP1

Supported Hardware

NI-DCPOWER Devices

NI-DMM Devices

NI-FGEN Devices

NI-SCOPE Devices

NI-RFSG Devices

Known Issues

Bug Fixes

Automating the Installation of NI Products

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.

• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
  

Using NI Software with Microsoft Windows 10

Legal Information

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.