下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-Industrial Communications for DeviceNet 2.1 Driver Win32Eng NI-DNet工业通信软件驱动程序2.1下载

NI DeviceNet工业通信软件
NI-Industrial Communications for DeviceNet可帮助您配置和控制DeviceNet网络上DeviceNet设备。
NI-Industrial Communications for DeviceNet是一种驱动程序软件，为您使用DeviceNet接口设备、C系列DeviceNet接口模块和PXI DeviceNet接口模块提供所需的支持。它包含丰富的LabVIEW VI和属性库，因此您可以为兼容的硬件设备创建自定义的DeviceNet应用程序。

Win32Eng
2.1
文件大小: 325978720 字节 (310.88 MB)
修改日期: 2012-06-12 22:05
MD5: 0bcefe1fa97def9d113b063205b3a943（官方正确）
SHA1: 807a40143a3b6ff404f2268bed212729d05fca5a
SHA256: adcd8c90c9bb72adeb8443e0784b4813912a7b31bb0e54925efcaa4ccf7590c5
CRC32: baea7218

百度网盘与NI官方下载地址：

NI-Industrial Communications for DeviceNet 2.1 Driver Win32Eng NI-DNet工业通信软件驱动程序2.1下载

http://pcmv.cn/thread-26199-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-Industrial Communications for DeviceNet® Readme

New Features and ChangesDeviceNet 2.1

• Added support for NI 9882 1-Port DeviceNet Module for NI CompactRIO.

• Added NI-DNET 1.x compatible LabVIEW VIs.
  

DeviceNet 2.0.2

• Added support for LabVIEW 2011 (32-bit) and LabVIEW Real-Time 2011.
  

DeviceNet 2.0.1

• Added support for LabVIEW 2010 (32-bit) and LabVIEW Real-Time 2010.
  

DeviceNet 2.0

• Supported NI DeviceNet hardware (PCI-8532 and PXI-8532).

• Supported LabVIEW 2009 (32-bit) and LabVIEW Real-Time 2009.
  

System RequirementsSupported Operating Systems

• Windows 7 (32-bit and 64-bit)

• Windows Vista (32-bit and 64-bit)

• Windows XP (32-bit)

• Windows Server 2003 R2 (32-bit)

• Windows Server 2008 R2 (64-bit)
  

Supported Hardware

• NI PCI-8532 (1-Port DeviceNet Interface for PCI)

• NI PXI-8532 (1-Port DeviceNet Interface for PXI)

• NI 9882 (1-Port C Series DeviceNet module for CompactRIO)
  

• Integrated CompactRIO Real-Time Controller: NI cRIO-9081, NI cRIO-9082

• LabVIEW FPGA 2011 (or later) is required to compile and deploy a bitstream with an NI 9882 module in the project
  

• Real-Time Controller: NI cRIO-9012, NI cRIO-9014, NI cRIO-9022, NI cRIO-9023, NI cRIO-9024 and NI cRIO-9025

• CompactRIO Reconfigurable Chassis: NI cRIO-9111, NI cRIO-9112, NI cRIO-9113, NI cRIO-9114, cRIO-9116, and cRIO-9118

• The LabVIEW 2011 SP1 (or later) FPGA Module is required to compile and deploy a bitstream with an NI 9882 module in the project
  

• CompactRIO - NI-RIO 4.1 (or later) and LabVIEW 2011 SP1 (or later) required

• CompactRIO - NI-RIO 4.1 (or later) and LabVIEW 2011 SP1 (or later) required for the following targets:
  

Supported Development Environment

• LabVIEW 2011 (32-bit)

• LabVIEW Real-Time 2011

• LabVIEW 2010 (32-bit)

• LabVIEW Real-Time 2010

• LabVIEW 2009 (32-bit)

• LabVIEW Real-Time 2009
  

Installation Instructions

• Insert the NI-IndCom for DeviceNet software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-IndCom for DeviceNet software CD.

• The installation wizard guides you through the necessary steps to install the NI-IndCom for DeviceNet software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.

• When the installation is complete, click Finish.
  

Installing the Software on a Real-Time Target

• Expand Remote Systems in the configuration tree and expand your real-time target.

• Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.

• If the real-time target is a CompactRIO controller, select Custom software installation.

• Select NI-IndCom for DeviceNet in the feature list and click Next.

• Follow the remaining installation instructions until installation is complete.
  

Accessing the Help

Finding Examples

Bug Fixes

Compatibility with NI-DNET 1.x

Important Information

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFEULAs directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.