下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI-CAN 2.4 Driver Win32Eng NI控制器局域网驱动软件2.4下载

NI-CAN
NI-CAN用于支持开发和部署多个控制器局域网(CAN)应用程序。
NI-CAN驱动软件适用于多种类型的CAN硬件应用程序，如高速CAN、容错CAN和LIN接口。NI-CAN具有强大的底层框架API和上层通道，可实现快速开发。NI-CAN用于为LabVIEW、LabWindows/CVI和ANSI C/C++提供本地支持。此外，NI-CAN还包括通道测试面板、总线监控器和记录器以及数据库编辑器等工具。LabWindows标志经Microsoft公司授权使用。Windows是Microsoft公司在美国和其他国家的注册商标。

Win32Eng
2.4
文件大小: 151481072 字节 (144.46 MB)
修改日期: 2010-04-25 04:17
MD5: d2d82d43cf55ec889fe7b7a3c4cdfde5（官方正确）
SHA1: 0cb20571b002ad35f0efb80f79dfe1b29137b21a
SHA256: d6c92fba84e1421195530e3884f1398171ac157760687fab51b7e0d56d77c206
CRC32: dcadb266

百度网盘和NI官方下载地址：

NI-CAN 2.4 Driver Win32Eng NI控制器局域网驱动软件2.4下载

http://pcmv.cn/thread-26175-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-CAN 2.4 Readme

• Documentation

• Supported Operating Systems

• Supported Hardware

• Supported Development Environments

• New Features as Compared to 2.3

• Changes from Previous Releases

• Additional Programming Topics

• Release Notes
  

Documentation

• Start » Programs » National Instruments » NI-CAN

Supported Operating Systems

• Windows 2000 Service Pack 3

• Windows XP
  

Supported Hardware

• PCI-CAN, PCI-CAN/2 (High-Speed; Series 1 and 2)

• PCI-CAN/LS, PCI-CAN/LS2 (Low-Speed/Fault-Tolerant; Series 1 and 2)

• PCI-CAN/DS, (Dual Speed: Port-1 High-Speed, Port-2 Low-Speed; Series 1)

• PCI-CAN/XS, PCI-CAN/XS2, (Software-Selectable HS/LS/SW; Series 2)

• PCMCIA-CAN, PCMCIA-CAN/2 (Series 1 and 2)

• PXI-8460, one-port or two-port (Low-Speed/Fault-Tolerant; Series 1 and 2)

• PXI-8461, one-port or two-port (High-Speed; Series 1 and 2)

• PXI-8462, (Dual Speed: Port-1 High-Speed, Port-2 Low-Speed; Series 1)

• PXI-8464, one-port or two-port (Software- Selectable HS/LS/SW; Series 2)
  

• USB-8472 (Low-Speed/Fault-Tolerant CAN)

• USB-8472s (Low-Speed/Fault-Tolerant CAN with synchronization)

• USB-8473 (High-Speed CAN)

• USB-8473s (High-Speed CAN with synchronization)

• USB-8476 (LIN)

• USB-8476s (LIN with synchronization)
  

• PCI-CAN, (pre-1998 CAN card, part numbers: 183887A-01, 183887B-01)

• PCI-CAN/2, (pre-1998 CAN card, part numbers: 183887A-02, 183887B-02)

• PCMCIA-CAN, (pre-1998 CAN card, part numbers: 184272A-01, 184272B-01, 184272C-01)

• PCMCIA-CAN/2, (pre-1998 CAN card, part numbers: 184272A-02, 184272B-02, 184272C-02)
  

• AT-CAN

• AT-CAN/2, (ISAPNP cards; High Speed; Series 1)
  

Supported Development Environments

• LabVIEW 7.1, 8.0, and 8.2

• LabVIEW Real-Time (RT) 7.1, 8.0, and 8.2

• LabWindows/CVI 7.1 and higher

• Microsoft Visual Basic 6.0

• Microsoft Visual C/C++ 6.0

• Borland C/C++
  

New Features as Compared to NI-CAN 2.3

• Support for the 847x and 847x with Sync series interfaces through the Frame API Network Interface Objects.

• Software selectable termination for USB-8472, USB-8472s, USB-8476, and USB-8476s through the Frame API Network Interface Objects.

• Support for PXI chassis and slot number as part of board properties in MAX.

• Support for a CAN bus load monitor and support for LIN within the Bus Monitor.

• New and updated CAN and LIN examples.
  

Changes from Previous Releases

• The nicanerr.txt file is now located in the ..National InstrumentsNI-CANin folder.

• LabWindows/CVI programs now build with Visual Studio 2005.

• The ncWriteMult function will compile using LabWindows/CVI.

• Fixed internal error when capturing 1-byte frames at 1 Mbit/s with the Bus Monitor.

• Channels greater than 52 bits are filtered from the GetNames function.
  

Additional Programming TopicsSupport of CANdb (*.DBC) Files

Updating get/Set Attribute in Frame API for LabVIEW

Release Notes

• For USB-LIN interfaces, the LIN bus must be terminated. This is typically done at the master node. For information on how to enable or disable termination on the USB-LIN, refer to the ncSetAttribute attribute function with the Frame API.

• The USB-LIN interfaces require external power from 8-18V. For more details on the power requirements, refer to the USB-LIN specifications sections within the NI-CAN Hardware and Software Manual.

• The USB LED will quickly switch between green and amber when the hardware is first detected.

• Fatal errors may cause the USB LED to flash in an error code pattern. Count the number of long and short flashes, then contact National Instruments support.

• If using the USB CAN or LIN products with a USB hub, the hub must be powered.

• Due to the inherent latencies of the Universal Serial Bus (USB), data or states received by the NI USB 847x Series devices might be processed by the driver on the host side later than data from a plug-in (PCI, PXI, PCMCIA) interface. This does not affect the timestamps as those are generated on the hardware, but could cause time-out failures with the NI USB 847x Series devices that won't happen on plug-in hardware. To avoid those, increase the timeout value for functions that perform a wait for a certain state.