下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Simnuation Interface Toolkit 2010 Win32Eng LabVIEW2010仿真接口工具包SIT2010下载

2010
文件大小: 144513632 字节 (137.82 MB)
修改日期: 2012-08-03 22:07
MD5: 77f6b7847c4faf2cfbd2e9e45fcf6c62（重复一致，可秒传）
SHA1: 3acdcf3ef53940c171fae7c818b4da5e648fad73
SHA256: 04e320aa42f5a716a0b23b1b7c427e28f35127c2d9cd45419d708d9c52ab1dad
CRC32: bf329a83

百度网盘和NI官方下载地址：

LabVIEW Simnuation Interface Toolkit 2010 Win32Eng LabVIEW2010仿真接口工具包SIT2010下载

http://pcmv.cn/thread-25514-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

LabVIEW 2010 Simulation Interface Toolkit Readme

Supported Operating Systems

• Windows 7 (32-bit and 64-bit)

• Windows Vista (32-bit and 64-bit)

• Windows XP (32-bit)

• Windows Server 2003 R2 (32-bit)

• Windows Server 2008 R2 (64-bit)
  

System Requirements

• The MathWorks, Inc. MATLAB® software and The MathWorks, Inc. Simulink® application software release 13.x, 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, or 2010a
  

• The MathWorks, Inc. Real-Time Workshop® software release 13.x, 14.x, 2006a, 2006b, 2007a, 2007b, 2008a, 2008b, 2009a, 2009b, or 2010a

• Microsoft Visual C++ 6.0, .NET 2003, 2005 (Professional or Express), or 2008 (Professional or Express)
  

• National Instruments LabVIEW 2010 Real-Time Module for ETS Targets.

• (Optional) National Instruments LabVIEW 2010 FPGA Module, to create customized FPGA bitfiles used in real-time simulations involving NI FPGA devices.

• You also must install the following driver software versions, depending on the type of hardware you want to use.
  
  

  National Instruments Hardware	Driver Software Version Required
  National Instruments FPGA Devices	NI-RIO™ 3.5.0 or later
  National Instruments CAN Interfaces	NI-CAN™ 2.7.1 or later
  National Instruments DAQ Devices	NI-DAQmx™ 9.1.5 or later

  
  

Installation/Upgrading Instructions

• LabVIEW Release Notes, which are available in your LabVIEW software kit.

• LabVIEW 2010 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
  

Upgrading from SIT 2.0.x/3.0.x/4.0/5.0.x/2009

• Load a host VI saved in SIT 3.0.x/4.0 and launch the SIT Connection Manager dialog box. Click the OK button to apply new settings. The conversion process preserves control/indicator mappings and all block diagram code. You will lose changes to SIT 3.0.x driver VI, but SIT 5.0.1 maintains hardware mappings. If the path to your model is invalid, SIT 5.0.1 prompts you to specify a valid path.

• SIT 3.0.x driver VIs are not supported in SIT 5.0.1. If you are not using the SIT Connection Manager you will need to manually upgrade the driver VI. Refer to one of the examples for the correct driver VI structure.

• SIT 5.0.1 does not convert driver VIs that SIT 2.0.x generated. Use the SIT Connection Manager dialog box to build a new driver VI for use in real-time simulations.

• SIT 5.0.1 does not convert host VIs that SIT 2.0 generated.

• The Simulation Interface Toolkit 4.0 deprecated the following VIs: SIT Execute Task and SIT Synchronize Base Rate.

• The Simulation Interface Toolkit 5.0.1 relies heavily upon the SIT Connection Manager dialog box. National Instruments recommends you use this dialog box to create host VIs and driver VIs.

• When running a simulation in Simulation Environment, the SignalProbe blocks from SIT 3.0.x/4.0 do not recognize tuneable variables specified through Data Objects. To be able to tune variables specified as tuneable through Data Objects, you must delete and re-add the SignalProbe block.

• Update any custom FPGA bitfiles and VIs you developed in SIT 3.0.x/4.0 to the new FPGA VI template and recompile them.

• SIT Write Log Settings to Configuration File.vi and SIT Write Playback Settings to Configuration File.vi in the User API have a new required input for Model Path.

• The Simulation Interface Toolkit 5.0/5.0.1/2009 VIs can be used in LabVIEW 2010 Simulation Interface Toolkit without any modification.

• The LabVIEW 2010 Simulation Interface Toolkit supports the 2009b and 2010a software releases of The Mathworks, Inc. MATLAB®, Simulink®, Real-Time Workshop®, and Stateflow® software.
  

What's New in 2010

• Updated Support for The MathWorks, Inc. Software
  

Support for Real-Time Targets

• PXI
  

• Any PXI-RT controller
  

• FieldPoint
  

• Any Compact FieldPoint controller
  

• CompactRIO
  
  

• Any CompactRIO controller is supported. A default bitfile is provided for the cRIO-9103 with NI-9215, NI-9263, NI-9411 and NI-9474 I/O modules. If you are using a different controller or a different set of I/O modules, you can use LabVIEW FPGA module to compile a custom bitfile.

• You can use the Single Point Timed I/O Timing Engine in the FPGA Wizard to help create the FPGA VI for use with SIT. FPGA VIs created by the FPGA Wizard can only be used when there is only one HW timed device in the system. If you are using more than one HW timed device (e.g. two R-series boards in a PXI chassi) you need to use the template provide with SIT.

• If you are using a VxWorks-based controller refer to the X:SimulationInterfaceToolkit�0VxWorks eadme_sit_vxworks.txt file for information about enabling VxWorks support, where X is the drive where you installed the Simulation Interface Toolkit.

• National Instruments recommends that you do not install the Scan Engine if you are using the CompactRIO controller with Simulation Interface Toolkit.
  

• NI PCI-7811R

• NI PXI-7811R

• NI PCI-7813R

• NI PXI-7813R

• NI PCI-7831R

• NI PXI-7831R

• NI PCI-7833R

• NI PXI-7833R

• NI cRIO-9103
  

Accessing the Help and Examples

• Launch LabVIEW.

• Select Help»Search the LabVIEW Help to launch the LabVIEW Help.

• Click the Contents tab.

• Navigate to the Toolkits»Simulation Interface top-level topic.
  

Development Tips

• Driver VIs running on NI FPGA devices use the hardware settings for channel measurements.

• In order to the example .mdl files, that are included with SIT, when the execution host is set to driver VI on local or real-time, you first must compile the model into a DLL using Simulink®.
  

Known Issues

Bug Fixes

Important Information