下载中心

NI-568x Driver Software 1.2 Win32/64En NI-568x驱动程序NI568X120

NI-568x Driver Software
NI-568x为使用NI RF功率传感器设备的客户提供支持。
NI-568x是与所有NI RF功率传感器设备通信必需的NI仪器驱动程序，包括NI-568x系列射频功率传感器设备。该驱动软件包括基于IVI准则的灵活API、完整的硬件支持文档以及配置、归零和测试实用程序。NI-568x包含了交互式软面板和示例。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

NI-568x Driver Software 1.2
发布日期：2013/10/25
包含的版本：完整版，版本号1.2.0
受支持的操作系统:
Windows 8 32-bit
Windows 7 32-bit
Windows 8 64-bit
Windows Vista 32-bit
Windows 7 64-bit
Windows Vista 64-bit
Windows XP 32-bit
语言：英文En
程序位数：32/64位
校验和：
文件大小: 509612832 字节 (486.00 MB)
修改日期: 2023-01-21 09:57
MD5: 405e4091d26e7f0ba549609b3d3d4995
SHA1: 089264648539d89b082c168ca8fb5996342bae0b
SHA256: e1c1edc0146a4a7ec0be2167c243368265ba5e823e491c403af74ea6fad664b3
SHA512: 4f2f72581c101f09d5bb6cd078b66b262e927442af07ef1e7c260395df244b6139a837f846f501756a06530c0ffef4ac6237f707edd2f456b03cf2de833fdaa0

百度网盘与NI官方下载地址：
请注册登录机器视觉论坛会员，购买附件查看下载地址

NI-568x Driver Software 1.2 Win32/64En NI-568x驱动程序NI568X120

http://visionbbs.com/thread-35755-1-1.html

(出处: LabVIEW视觉)

NI-568x Readme

Version 1.2

Thank you for using NI-568x. This file contains important information regarding NI-568x and is organized into the following sections:

• New Features

• Supported Hardware

• System Requirements

• Installed File Names and Locations

• Documentation

• NI-568x Updates and Notifications

• Uninstalling/Modifying NI RF Power Meters Software

• Known Issues

• Upgrading the Firmware

• Bug Fixes

• Automating the Installation of NI Products

• How to Use NI Software with Microsoft Windows 8

• Important Information
  

New Features

NI-568x 1.2 includes the following new features:

• Support for LabVIEW 2013 Service Pack 1 (32-bit), LabVIEW 2013 SP1 (64-bit), LabVIEW 2012 Service Pack 1 (32-bit), LabVIEW 2012 SP1 (64-bit), LabVIEW 2011 SP1 (32-bit), LabVIEW 2011 SP1 (64-bit), LabVIEW 2010 SP1 (32-bit), LabVIEW 2010 SP1 (64-bit)

• Support for Windows 8

• Updated NI-568x Soft Front Panel (SFP)

• Updated shipping examples
  

NI-568x 1.1 includes the following new features:

• Support for the NI USB-5681 (NI 5681)

• Updated NI-568x Soft Front Panel (SFP)
  

NI-568x 1.0 includes the following new features:

• Support for the NI USB-5680 (NI 5680)
  

Supported Hardware

The NI-568x instrument driver supports the following power meters:

• NI USB-5680

• NI USB-5681
  

System RequirementsSupported Operating Systems

NI-568x 1.2 supports the following operating systems:

• Windows 8 (32-bit and 64-bit)

• Windows 7 (32-bit and 64-bit)

• Windows Vista (32-bit and 64-bit)

• Windows XP (32-bit)
  

It is recommended that you have the most recent service pack for your operating system installed. For Windows XP however, the minimum is Windows XP SP3.

Minimum System Requirements

• Processor—Pentium III/Celeron 600 MHz or equivalent

• RAM—
  

• Windows XP: 128 MB

• Windows 7/Vista: 512 MB

• Windows 8: 512 MB
  

• Microsoft Internet Explorer 5.5 or later

• A screen resolution of 1,024 × 768

• Windows 8/7/Vista/XP, with all available critical updates and service packs

• USB port
  

Note NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate when using this product. These modes terminate any operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.

Recommended System

• Processor—Pentium 4 or equivalent

• RAM—
  
  

• Windows XP: 256 MB

• Windows 7/Vista: 1 GB

• Windows 8: 1 GB
  

Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW, NI LabWindows™/CVI™ or Microsoft Visual Studio®, before installing NI-568x. To add support for ADEs installed after installing NI-568x, modify your NI-568x installation or launch the NI-568x installer again.

If you are developing an NI-568x application, your system must have one of the following ADEs:

• LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 SP1 (32-bit), or 2012 SP1 (64-bit), 2013 SP1 (32-bit), or 2013 SP1 (64-bit)

• LabWindows™/CVI™ 9.0 or later

• Microsoft Visual C++ (MSVC) 7.1 or later
  

Installed File Names and Locations

• <NIDocDir> is an alias for the following National Instruments file folder location:
  

• Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments

• Windows 8/7/Vista: UsersPublicDocumentsNational Instruments
  

• <IVIROOTDIR32> is an alias for the following National Instruments file folder location:
  

• Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI

• Windows 8 (32-bit)/7 (64-bit)/Vista (64-bit)*: Program Files (x86)IVI
  

• Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI

• Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)*: Program Files (x86)IVI FoundationIVI

  Note	$(IVIROOTDIR32) is configured as an environment variable on the target system.
  	If you upgraded an installation of IVI, your files may be located in the following location:

  
  

• <IVIROOTDIR64> is an alias for the following National Instruments file folder location:
  

  * These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

  File Locations

  Item	Installation Location on Windows 8 (32-bit)/Windows 7 (32-bit)/Vista (32-bit)/XP
  NI-568x	<IVIROOTDIR32>Drivers i568x
  NI-568x Function Panel	<IVIROOTDIR32>Drivers i568x i568x.fp
  LabVIEW Examples	<LabVIEW>examplesinstr i568x
  C Examples	<NIDocDir>NI-568xexamplesc
  LabWindows/CVI Examples	<NIDocDir>CVIsamples i568x
  NI-568x Header files	<IVIROOTDIR32>Include
  NI-568x Import Library files (32-bit)	<IVIROOTDIR32>Libmsc
  NI-568x Import Library files (64-bit)	<IVIROOTDIR32>Lib_x64msc
  NI-568x DLL (32-bit)	<IVIROOTDIR32>Bin

  Additional File Locations for Windows 8 (64-bit)/Windows 7 (64-bit)/Vista (64-bit)*

  Item	Installed Location on Windows 8 (64-bit)/Windows 7 (64-bit)/Vista (64-bit)
  NI-568x Function Panel	<IVIROOTDIR64>Drivers i568x i568x.fp
  NI-568x Header files	<IVIROOTDIR64>Include
  NI-568x Import Library files (64-bit)	<IVIROOTDIR64>Lib_x64msc
  NI-568x DLL (64-bit)	<IVIROOTDIR64>Bin
  * These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

  Documentation

  Documentation is available at Start»All Programs»National Instruments»NI-568x»Documentation. Visit ni.com/manuals for the latest versions of product documentation. The documentation for NI-568x includes the following items:

  Note  To view the PDF documentation, you must have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

  NI-568x Updates and Notifications

  National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info, and enter the info code updates to access this information.

  Uninstalling/Modifying NI RF Power Meters Software

  For Windows XP, complete the following steps:

  For Windows 7/Vista, complete the following steps:

  For Windows 8, complete the following steps:

  As part of the NI-568x installation, the following list of software is installed. To completely remove NI- 568x from your system, you must also remove all of the following packages:

  Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

  Known Issues

  You can access the software and documentation known issues list online. Refer to the NI-568x 1.2 Known Issues at ni.com for an up-to-date list of known issues in NI-568x 1.2.

  Upgrading the Firmware

  A newer firmware version than what shipped with the NI USB-5680 device is available at the National Instruments website. NI recommends that you upgrade the firmware after you install NI-568x 1.2.

  Bug Fixes

  The following items are changes in NI-568x 1.2 from NI-568x 1.1.

  ID	Fixed Issue
  238457	Fixed an issue where power meters did not appear in NI Measurement & Automation Explorer (MAX) after installing the NI-568x driver.
  238742	Fixed an issue where timeout errors occurred in scope mode.
  238918	Fixed an issue where you could not use the power meter after disconnecting and reconnecting the power meter.

  The following items are changes in NI-568x 1.1 from NI-568x 1.0.

  ID	Fixed Issue
  93562	Fixed an issue in which the NI-568x properties were not accessible from the property node.
  211620	Fixed an issue in which LabVIEW 8.2 would not launch after installing NI-568x.
  106509	Fixed a timeout error when reading from the NI 5680.

  Automating the Installation of NI Products

  You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

  If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

  For more information, refer to the following KnowledgeBase articles:

  How to Use NI Software with Microsoft Windows 8

  When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

  Using NI Launcher

  NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

  Note   MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

  Pinning Frequently Used Applications

  For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

  Current Application	Icon Location	Pin to Action
  Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
  Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
  Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

  Finding All Programs

  If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

  For more information about NI support for Windows 8, visit ni.com/windows8.

  ---

  Important Information

  Copyright

  © 2007—2013 National Instruments Corporation. All rights reserved.

  Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

  National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

  End-User License Agreements and Third-Party Legal Notices

  You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  Trademarks

  Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

  Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.

  Patents

  For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

• NI IVI Compliance Package 4.4

• NI Measurement & Automation Explorer 5.3.3

• NI Measurement Studio Common .NET Assemblies for .NET 4.0

• NI System Configuration API 5.3.3

• NI System API Windows 32-bit

• NI-VISA Runtime 5.2
  

• Right-click on the Start screen.

• Select All apps, and launch the Control Panel.

• Select Programs»Programs and Features.

• Select National Instruments Software.

• Click the Uninstall button.

• Select NI-568x 1.2 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI-568x 1.2 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add or Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI-568x 1.2 from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• NI-568x Readme (this document)

• NI RF Power Meters Getting Started Guide—Explains how to install, configure, and set up the NI 5680/5681 RF power meters. Printed and PDF format.

• NI RF Power Meters Help—Contains information about how to perform basic measurements with the NI 5680/5681, device information, and programming references for LabVIEW, LabWindows/CVI, and C. Online help format.

• Specifications document for your device—Contains specifications for the capabilities and valid operating conditions of your NI device. Printed and PDF format.

• Read Me First: Safety and Electromagnetic Compatibility—Includes safety instructions and information about the radio-frequency interference characteristics of the hardware it accompanies. Printed format.
  

• Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)*: Program FilesIVI FoundationIVI

  Note	$(IVIROOTDIR64) is configured as an environment variable on the target system.