kirsch_ampkirsch_ampKirschAmpKirschAmpkirsch_amp (算子)

名称

kirsch_ampkirsch_ampKirschAmpKirschAmpkirsch_amp — 使用 Kirsch 算子检测边缘（振幅）。

签名

kirsch_amp(Image : ImageEdgeAmp : : )

描述

kirsch_ampkirsch_ampKirschAmpKirschAmpKirschAmpkirsch_amp calculates an approximation of the first derivative of the image data and is used as an edge detector. The filter is based on the following filter masks: -3 -3 5 -3 5 5 5 5 5 5 5 -3 -3 0 5 -3 0 5 -3 0 -3 5 0 -3 -3 -3 5 -3 -3 -3 -3 -3 -3 -3 -3 -3 5 -3 -3 -3 -3 -3 -3 -3 -3 -3 -3 -3 5 0 -3 5 0 -3 -3 0 -3 -3 0 5 5 -3 -3 5 5 -3 5 5 5 -3 5 5 The result image contains the maximum response of all masks.

注意

请注意，若使用域缩减后的图像作为输入，滤波器算子可能会返回意外结果。请参阅滤波器一章

执行信息

多线程类型：可重入（与非独占算子并行运行）。
多线程作用域：全局（可从任何线程调用）。
在元组级别上自动并行化。
在通道级别上自动并行化。
在域级别上自动并行化。

参数

ImageImageImageImageimageimage (输入对象) (multichannel-)image(-array) → object (byte / int2 / uint2)

输入图像。

ImageEdgeAmpImageEdgeAmpImageEdgeAmpImageEdgeAmpimageEdgeAmpimage_edge_amp (输出对象) image(-array) → object (byte / int2 / uint2)

Edge amplitude (gradient magnitude) image.

示例（HDevelop）

read_image(Image,'fabrik')
kirsch_amp(Image,Kirsch_amp)
threshold(Kirsch_amp,Edges,128,255)

示例（C）

read_image(&Image,"fabrik");
kirsch_amp(Image,&Kirsch_amp);
threshold(Kirsch_amp,&Edges,128,255);

示例（HDevelop）

read_image(Image,'fabrik')
kirsch_amp(Image,Kirsch_amp)
threshold(Kirsch_amp,Edges,128,255)

示例（HDevelop）

read_image(Image,'fabrik')
kirsch_amp(Image,Kirsch_amp)
threshold(Kirsch_amp,Edges,128,255)

示例（HDevelop）

read_image(Image,'fabrik')
kirsch_amp(Image,Kirsch_amp)
threshold(Kirsch_amp,Edges,128,255)

结果

kirsch_ampkirsch_ampKirschAmpKirschAmpKirschAmpkirsch_amp 始终返回 2 ( H_MSG_TRUE )。如果输入为空则可设置行为通过 set_system('no_object_result',<Result>)set_system("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>)SetSystem("no_object_result",<Result>)set_system("no_object_result",<Result>)。如有必要，则抛出异常。

可能的前趋

binomial_filterbinomial_filterBinomialFilterBinomialFilterBinomialFilterbinomial_filter, gauss_filtergauss_filterGaussFilterGaussFilterGaussFiltergauss_filter, sigma_imagesigma_imageSigmaImageSigmaImageSigmaImagesigma_image, median_imagemedian_imageMedianImageMedianImageMedianImagemedian_image, smooth_imagesmooth_imageSmoothImageSmoothImageSmoothImagesmooth_image

替代

sobel_ampsobel_ampSobelAmpSobelAmpSobelAmpsobel_amp, frei_ampfrei_ampFreiAmpFreiAmpFreiAmpfrei_amp, prewitt_ampprewitt_ampPrewittAmpPrewittAmpPrewittAmpprewitt_amp, robinson_amprobinson_ampRobinsonAmpRobinsonAmpRobinsonAmprobinson_amp, robertsrobertsRobertsRobertsRobertsroberts

另见

bandpass_imagebandpass_imageBandpassImageBandpassImageBandpassImagebandpass_image, laplace_of_gausslaplace_of_gaussLaplaceOfGaussLaplaceOfGaussLaplaceOfGausslaplace_of_gauss

模块

基础

算子