get_data_code_2d_objects — 访问在搜索二维数据码符号期间创建的图标对象。
get_data_code_2d_objects( : DataCodeObjects : DataCodeHandle, CandidateHandle, ObjectName : )
算子 get_data_code_2d_objects facilitates to access
iconic objects that were created during the last call of
find_data_code_2d while searching and reading the 2D data
code symbols.
Besides the name of the object (ObjectName), the 2D data
code model (DataCodeHandle) must be passed to
get_data_code_2d_objects.
In addition, in CandidateHandle a handle of a result
or candidate structure or a string identifying a group of candidates
(see get_data_code_2d_results) must be passed.
These handles are returned by find_data_code_2d for all
successfully decoded symbols and by get_data_code_2d_results
for a group of candidates.
If these operators return several handles in a tuple, the individual
handles can be accessed by normal tuple operations.
For an explanation of the concept of the 2D data code reader see the introduction of chapter Identification / Data Code。
If 'discard_undecoded_candidates' was set to 'yes'
with set_data_code_2d_param, only results of successfully
decoded candidates can be accessed.
Some objects are not accessible without setting the model parameter
'persistence' to 1 (see
set_data_code_2d_param).
The persistence must be set before calling
find_data_code_2d, either while creating the model with
create_data_code_2d_model or with
set_data_code_2d_param。
Currently, the following iconic objects can be retrieved:
Regions of the modules
All data code types:
All modules that were classified as foreground (set).
All data code types except DotCode:
All modules that were classified as background (not set).
These region arrays correspond to the areas that were used for the
classification.
The returned object is a region array.
Hence it cannot be requested for a group of candidates.
Therefore, a single result handle must be passed in
CandidateHandle.
The model persistence must be 1 for this object.
In addition, requesting the module ROIs makes sense only for symbols
that were detected as valid symbols.
For other candidates, whose processing was aborted earlier, the
module ROIs are not available.
XLD contour
An XLD contour that surrounds the candidate or decoded symbol.
This object can be requested for any group of results or for any single candidate or symbol handle. The persistence setting is of no relevance.
Pyramid images
Pyramid image, in which the candidate was found.
Pyramid image, in which the candidate was investigated more closely.
The persistence setting is also not relevant here.
DataCodeObjects (输出对象) object(-array) → object
Objects that are created as intermediate results during the detection or evaluation of 2D data codes.
DataCodeHandle (输入控制) datacode_2d → (handle)
Handle of the 2D data code model.
CandidateHandle (输入控制) integer → (integer / string)
Handle of the 2D data code candidate. Either an integer
(usually the ResultHandle of find_data_code_2d) or
a string representing a group of candidates.
默认值： 'all_candidates'
建议值： 0, 1, 2, 'all_candidates', 'all_results', 'all_undecoded', 'all_aborted'
ObjectName (输入控制) string → (string)
Name of the iconic object to return.
默认值： 'candidate_xld'
值列表： 'candidate_xld', 'module_0_rois', 'module_1_rois', 'process_image', 'search_image'
* Example demonstrating how to access the iconic objects of the data code
* search.
* Create a model for reading Data matrix ECC 200 codes
create_data_code_2d_model ('Data Matrix ECC 200', [], [], DataCodeHandle)
set_data_code_2d_param (DataCodeHandle, 'default_parameters', \
'maximum_recognition')
set_data_code_2d_param (DataCodeHandle, 'persistence', 1)
* Read an image
read_image (Image, 'datacode/ecc200/ecc200_disturbed_012')
* Read the symbol in the image
find_data_code_2d (Image, SymbolXLDs, DataCodeHandle, [], [], \
ResultHandles, DecodedDataStrings)
* Get the handles of all candidates that were detected as a symbol but
* could not be read
get_data_code_2d_results (DataCodeHandle, 'all_undecoded', 'handle', \
HandlesUndecoded)
* For every undecoded symbol, get the contour and the classified
* module regions
for I := 0 to |HandlesUndecoded| - 1 by 1
* Display image.
dev_display (Image)
dev_set_draw ('margin')
* Get the contour of the symbol.
dev_set_color ('blue')
get_data_code_2d_objects (SymbolXLD, DataCodeHandle, \
HandlesUndecoded[I], 'candidate_xld')
dev_display (SymbolXLD)
* Get the module regions of the foreground modules
dev_set_color ('green')
get_data_code_2d_objects (ModuleFG, DataCodeHandle, \
HandlesUndecoded[I], 'module_1_rois')
dev_display (ModuleFG)
* Get the module regions of the background modules
dev_set_color ('red')
get_data_code_2d_objects (ModuleBG, DataCodeHandle, \
HandlesUndecoded[I], 'module_0_rois')
dev_display (ModuleBG)
* Stop for inspecting the image.
stop ()
endfor
* Clear the model
clear_data_code_2d_model (DataCodeHandle)
算子 get_data_code_2d_objects 返回值 2 (
H_MSG_TRUE)
if the given parameters are correct and the requested objects are
available for the last symbol search.否则，将抛出异常。
find_data_code_2d,
query_data_code_2d_params
query_data_code_2d_params,
get_data_code_2d_results,
get_data_code_2d_param,
set_data_code_2d_param
数据码